RELIABLE Machinery Professional Beverage Production Line
This glass bottle filling machine is suitable for packing different kinds of liquids, such as water, juice, beer or gas containing beverage. Its performance is as following: all parts, for instance, filling valve, which directly contact medium are made of stainless steel or harmless material. So it conforms to the requirements of Food sanitation.
1) This glass bottle filling machine is mainly used for water, juice, carbonated gas drinks, beer, wine and sauce filling operation;
2) This glass bottle filling machine is combined of rinsing, filling, capping.
3) the whole procedure is full-automatic, and suitable for glass bottle and aluminum steal proof caps for filling vodka, wine , sauce and etc;
4) The applicable bottle type can be adjusted freely and conveniently, and easily operation;
5) The filling type is adopted new type negative pressure filling, making the filling quickly and steadily; That's why the glass bottle filling machine has more capacity and benefit compared other machine with same specification;
6) This glass bottle filling machine is adopted advanced programmable controller PLC, and make the machine running automatically, and bottle input conveyor adopts transducer with speed adjustable, and bottle output conveyor adopts speed adjustable motor;
7) Cooperation with transducer of main machine makes the bottle running smoothly and reliably;
8) It is convenient to operate with high automation because of every part of machine is inspected to run by photoelectric detector;
9) The glass bottle filling machine is idea-preferred equipment for beverage makers.
Commonly 50-100mm (can adjustable)
Commonly 150-310mm(can adjustable)
Suitable cap shape
Cork,crown cover,aluminum screw cap28 or 30 mm
It is made up of lifting device, the main transmission device, the fixed frame, clamp device, distributor, and open clamp cams and over turn cams etc.
1.Lifting device is used to adjust the height of the rotary tables and clamps of machine to adapt to the bottle height. Its power comes from the lifting lever. Lever rotates drive screw rotation to realize the rotary tables lift.
2.When the clamp rotate to star wheel with rotating table, bottle into the middle of clamp, open clamp cam close the clip claw and clip the bottleneck with the rotating clamp. When rotary tables to rotate, clamp pieces will rotate with over turn cam, guide cams rotates around over turn cam and flip the bottleneck to 180 degree till the bottle mouth is top downwards and directly face the spray nozzle, then the clean water in the spray nozzle sprays and wash the inside of the bottle, Drain, turn 180 degree downwards and then goes out from the star wheel.
It is made up of main liquid pipe, rotating cylinder bearing base, filling cylinder fulcrum loop, wine or carbonated drink tank, filling valve, filling cylinder pipe, control loop device, ascending device, the distributor, height adjusting control, stimulating bubble arm, vacuum system, etc.
1.Glass bottle filling machine is specially designed according to the beer feature, and the filling part is designed to be twice pre-evacuation.
It is made up of cap holder, capping sildeway, capping upper part, capping lower part, elevating part and anti-circling column.
1. The up and down movement of the capping nozzle is driven by the capping cam, which is fixed. The crown caps are sending to the cap sildeway by a mixer in the cap container, and then slid to the capping mould of the capping nozzle.
2. The capping nozzle is driven by power and move in circle. The capping nozzle would move upword and downward one time in each circle of the capping. The cam, set up in the upper fixed part of the capping machine, controls the upward and downward movement of the capping nozzle.
3. After the bottle is transmitted from the filling machine, the capping nozzles have been fed with a bottle cap. The capping nozzles moves downwards the bottle under the capping platform driven by cam guildeway, then the bottle cap with the aid of the damping ring.
Cap Unscramble / Cap Loader
Deliver the bottle cap to the capping part, and the cap elevator will adjust the cap to the correct direction, and wait for it to be transferred to the bottle neck.
How to get my exact offer?
A. If you have clear demand, please inform us, we will make detailed good quote for you soon.
B. If you are new in this filed and don't have clear objectives, you can share us your ideas, investment budget or workshop size, we can make proposal recommendation for you.
How can I check the quality of your machine?
A. You are always welcome to visit our factory, we will show you machine working and detailed parts & raw materials. We will pick you up at stations/airports.
B. We have reference projects in most countries, after getting permission of the customer, you can go to visit them.
Do you have agents or office out of China?
Now we have agent in Ghana, UAE, Uganda, Ethiopia... Welcome to join us!