RELIABLE Machinery Professional Beverage Production Line
RELIABLE Machinery Professional Beverage Production Line
RM-6000 blow moulding machine is suitable for producing PET plastic containers and bottles in all shapes. The blow moulding machine is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Description
Blow Moulding Machines can blow the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type.
1) High Automatization
2) High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3) High Quanlity: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4) High Speed: 6000BPH(6-cavity).
5) No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6) Low Cost:Low consumption of electricity, air and water.
7) High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.
Working process:
Features:
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: less than 0.2 percent.
Technical Parameters:
Type | RM-6000 | |
Output | According To Bottle Shape | 5500-6000PCS/H |
Bottle Specification | Bottle Body Diameter | 20mm-100mm |
Bottle Height | 50mm-350mm | |
Bottle Mouth Diameter | 15mm-38mm | |
Mold | Cavity | 6cavities |
Mold Thickness | 200mm | |
Mold Effective Area | 800*800mm | |
Main Power | Power ,Voltage | 380v 3Phase /220v 3Phase 50/60HZ |
Install Machine Power / Actual Use Power | 68kw / 15kw | |
Air Source | Low Pressure Air Compressor | 2.0m3/Min 1.0mpa |
High Pressure Air Compressor | 3.6m3/Min 3.0mpa | |
Cold-Dry Machine | 2.0m3/Min 3.0mpa 1set | |
Cooling Water | Cooling Quantity | 15L/Min |
Main Machine Size | L*W*H | 2808*1958*1920mm/4600kg |
Feeder Size | L*W*H | 2000*950*2480mm/250kg |
Inside Details
|
 Auxiliary Equipment Flow chart of blowing machine is : High Pressure Air Compressor -- Air Tank -- Air Fiter -- Air Dryer -- Low Pressure Air Compressor -- Air Fiter -- Full Automatic Blow Moulding Machine -- Mould -- Water Chiller All these equipments are available to take. |
 |
 Control System The brand of the switch is Autonics, and all other electrical brands are Siemens and Schneider. The electric box is inside the filling machine, saving the factory space. An external air box is additionally provided, which is convenient for observing the air volume outside and more neat. |
Spare Part List:
|
How to get my exact offer?
A. If you have clear demand, please inform us, we will make detailed good quote for you soon.
B. If you are new in this filed and don't have clear objectives, you can share us your ideas, investment budget or workshop size, we can make proposal recommendation for you.
How can I check the quality of your machine?
A. You are always welcome to visit our factory, we will show you machine working and detailed parts & raw materials. We will pick you up at stations/airports.
B. We have reference projects in most countries, after getting permission of the customer, you can go to visit them.
Do you have agents or office out of China?
Now we have agent in Ghana, UAE, Uganda, Ethiopia... Welcome to join us!
