Servo Motor Full Automatic 5 liter 2 Cavity PET Bottle Making Machines Blowing Machine for Oil Water Bottle Servo Motor Full Automatic 5 liter 2 Cavity PET Bottle Making Machines Blowing Machine for Oil Water Bottle

Edible oil bottle PET bottle blowing machine with up to 3 cavity, single cavity can manufacture PET bottles, 5 liters of cooking oil. This edible oil PET bottle blowing machine can also blow up other 2L large capacity plastic packaging containers, such as carbonated beverage bottles, middle and low temperature filling fruit juice beverage bottles, mineral water bottles, pesticide bottles and other plastic bottles blowing molding.

Quantity:
Share this:

Description

A. Advanced PLC control system, stable and excellent performance.

B. Conveyor belt automatically feeds preforms.

C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared pre-heater.

D. High adaptability, preform absorbs heat by adjusting the distance between lamp and reflector. With automatic constant temperature device, temperature is kept within a certain range.

E. Safety locks are provided during each mechanical action to protect operator's safety.

F. Use cylinder instead of hydraulic cylinder, low pollution, low noise.

G. Use different air pressure for blowing and machine operation, energy saving and environmental protection.

H. Equipped with high pressure and double-crank linkage clamping, providing high clamping force.

I. Two ways of operating: automatic and manual.

J. Safe, reliable, unique valve position design makes blowing process easier to control.

K. Low-cost, high-efficiency, easy-to-operate, easy-to-maintain, advanced automatic process flow.

L. Avoid bottle contamination.

M. Protection of low temperature cooling system.

N. Easy to install and start.

O. Low scrap rate.


Edible Oil Bottle Type: 

WPS拼图2.png


Features:

1. Stable performance with advanced PLC.

2. Automatic preform conveyer to save human cost.

3. Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.

4. High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater and keep the proper temperature and humidity invariable.

5. High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.

6. Introduce the FESTO air cylinder to avoid contamination and noise.

7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

8. Strong clamping force with high pressure and double crank links to lock the mould.

9. Two ways of operating: Automatic and manual.

10. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.

11. Contamination is avoided for the bottle body.

12. Ideal effect of the chilling with the chilling system.

13. Easy installation and starting

14. Safe reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.

图片0.png

Technical Parameters:

Model

RM2500-2

Product parameters

Maximum capacity

5L

Number of cavities

2Cavites

Yield

1600-1800pcs/hr

Maximum caliber

45-80mm

The maximum diameter

210mm

Maximum height

360mm

Power specification

Number of lamps

60pcs

Maximum heating power

100kw

Total power of the machine

100kw

Actual power consumption

22kw

Air pressure specification

Working pressure

0.7-0.9mpa

Low voltage power consumption

2600ltr/min

Blowing pressure

25-35kg/cm²

High voltage power consumption

4500-5000ltr/min

Cooling water specifications

Working pressure

5-6kc/cm²

Humidity range

10.c

Consumption

6600kcal/hr

Appearance specifications

Machine size

5.6*2.1*2.1m

Machine weight

5.5T





 



Inside Details 

图片1.png

Servo transmission system


High positioning accuracy, fast speed and stability, good reliability. Gas circuit design will divide action and blowing into three parts to meet the needs of different pressure for blowing bottles and movement; Adopt high pressure and double crank arm link locking, strong clamping force.

Adopt infrared lamp heating


Adopt infrared lamp heating, strong penetration, preform rotation heating, track revolution, heating evenly, fast and reliable; Heating lamp, reflector width and height can be adjusted to suit preform heating of different structure, with automatic temperature-removal device to ensure the constant temperature of oven. 


图片2.png
图片3.png

Auto-loader


Auto-loader improves working efficiency, accurate transportation, reliable and durable, raw materials are completely free of moisture, pollution, foreign matter, and loss during feeding process. Realize transportation process of feeding process, avoid danger of high-altitude feeding, reduce labor intensity and increase production efficiency.

Intelligent Human-Machine Interface


1.Human-machine interface control, easy operate and monitor.

2.Live production information supervise, auto record production data everyday

3.Failure warning and troubleshooting.

图片4.png


Auxiliary Equipment

Flow chart of blowing machine is : 

High Pressure Air Compressor -- Air Tank -- Air Fiter -- Air Dryer -- Low Pressure Air Compressor -- Air Fiter -- Full Automatic Blow Moulding Machine -- Mould -- Water Chiller


All these equipments are available to take.

图片9.png

HIGH PRESSURE AIR COMPRESSOR


Air Discharge:1.2 m³/min

Discharge Pressure:3.0 Mpa

Motor Power:11 KW

Weight:546 Kg

Size(L*W*H) :1880×850×1050 mm

图片10.png

AIR COOLING DRYER


Capacity:2.0 m³

Pressure:3.0 Mpa

Temperature:3.0 ℃

Weight:50 Kg

Size ( L*W*H):880*700*900 mm

图片11.png

MOULD WATER CHILLER


Max film:120 L/min

Compressor:5 HP

Water tank:55 L

Weight:160 Kg

Refrigerant:R22

Size ( L*W*H):960x650x1000 mm

图片12.png

AIR FILTER


Capacity:2.0 m³

Pressure:3.2 Mpa

Temperature:1-100℃

Weight:20 Kg

Size ( L*W*H):30*30*60 mm

图片13.png

BLOW MOULD


Max mould plate Dimension(L*W):470*350 mm

Max mould thickness:220 mm

The form work is made of high tensile steel tie rods and high quality ductile iron, which is strong and durable with long working life

Spare Part List:

零配件


How to get my exact offer?

A. If you have clear demand, please inform us, we will make detailed good quote for you soon.

B. If you are new in this filed and don't have clear objectives, you can share us your ideas, investment budget or workshop size, we can make proposal recommendation for you.

 

How can I check the quality of your machine?

A. You are always welcome to visit our factory, we will show you machine working and detailed parts & raw materials. We will pick you up at stations/airports.

B. We have reference projects in most countries, after getting permission of the customer, you can go to visit them.

 

Do you have agents or office out of China?

Now we have agent in Ghana, UAE, Uganda, Ethiopia... Welcome to join us!

 

×

Contact Us

×

Inquire

*Name
*Email
Company Name
Tel
*Message